Ricoh Network Card PCI to PC Card Adapter User Guide

PCI-to-PC Card Adapter  
PCI-to-CardBus Adapter Single  
Quick Installation Guide  
1. Introduction  
The PCI-to-PC Card Adapter/PCI-to-CardBus Adapter Single provides  
easy upgrade and expansion solutions to your system through all kinds of  
PC Cards. It can work together with 16-bit PCMCIA or 32-bit CardBus  
wireless PC Card turning your computer into a wireless-enabled system.  
1-1 Features and Benefits  
Compliant with PCI Specification, revision 2.2  
Supports 32-bit CardBus (Card-32) and 16-bit  
(PCMCIA 2.1/JEIDA 4.2) PC Cards  
Provides one type II PC Card slot for  
various kinds of PC Card connection  
Provides easy upgrade and expansion solutions to your system  
through all kinds of PC Cards  
Works with various types of 16-bit PCMCIA and  
32-bit CardBus PC Cards  
Together with PCMCIA or CardBus wireless PC Card  
turning your computer into a wireless-enabled system  
1
 
manual for further information, if needed.  
1. Turn OFF the power to your computer and any other connected  
peripheral devices.  
2. Unplug the power cord from the back of the computer.  
3. Remove your computer's cover.  
4. Remove the slot bracket from an available PCI slot.  
5. To install the card, carefully align the card's bus connector with the  
selected PCI slot on the motherboard. Push the board down firmly, but  
gently, until it is well seated.  
3. Software Installation  
3-1 Windows 98SE/ME/2000/XP for 32-bit CardBus PC Card  
In Windows 98SE, you need to insert Windows OS CD you’re your  
CD-ROM drive and follow screen message to install this adapter.  
Your system will automatically detect and install this adapter under  
Windows ME/2000/XP.  
3-2 Windows 98SE/ME/2000 for 16-bit PCMCIA PC Card  
1. After installing the board, boots up your system.  
2. Insert the driver CD-title into your CD-ROM drive.  
3. Double click d:\SETUP.exe (assume d: is your CD-ROM drive) and  
follow screen message to install this adapter  
4. Remove the driver CD-title and restart the computer system to  
complete the installation.  
Remark:  
Only PCI-to-PC Card Adapter user has to install this driver  
3
 
3-3 Windows XP for 16-bit PCMCIA PC Card  
Your system will automatically detect and install this adapter under  
Windows XP.  
Verify Installation for Windows 98SE/ME  
1. Click Start, Settings, Control Panel. Double click System.  
2. Click Device Manger.  
3. Double click PCMCIA socket, Ricoh RL5C475 CardBus  
Controller will be listed.  
Verify Installation for Windows 2000/XP  
1. Right click My Computer, then click Manager.  
2. Click Device Manger.  
3. Double click PCMCIA adapters, Ricoh R/RL/RT/RC/5C475(II),  
R5C520 or compatible CardBus Controller will be listed.  
5303-0226-001  
4
 

RCA CRT Television F25423 User Guide
Realistic Stereo Receiver PRO 2004 User Guide
Renesas Switch M30240T RPD E User Guide
Ricoh All in One Printer Type 2018 User Guide
Rockford Fosgate Car Speaker RP9314 User Guide
RTS Network Card XCP 48 RJ45 User Guide
Ryobi Laminate Trimmer TR45K User Guide
Salton Blender FSB100 User Guide
Sanyo Air Conditioner C2462R User Guide
Sears Fire Pit 03907333 3 User Guide