3
⁄
8" STRAIGHT AIR DRILL
MODEL H6363
INSTRUCTION SHEET
Introduction
The Model H6363 is ideal for production drilling
applications. It features a paddle switch with safe-
ty release, 2,600 RPM free speed and 3⁄8" drilling
capacity. Recommended air pressure is 90 PSI
and average air consumption is 6 CFM. Includes
a 1⁄4" NPT air fitting and chuck key.
Inventory
A. Air Drill........................................................ 1
1
B.
⁄4" NPT Air Fitting....................................... 1
C. Chuck Key.................................................. 1
Figure 1. Model H6363.
Lubricating Your New Air Drill
Lubricate your air drill with pneumatic tool oil. If
you do not have a lubricator installed in your air
line, place 1–2 drops of pneumatic tool oil into the
air fitting daily, as shown in Figure 2.
Damage to your eyes, lungs, and ears could
result from using this drill without proper
protective gear. Always wear safety glasses,
a respirator, and hearing protection while
drilling.
Figure 2. Lubricating the Model H6363.
Need Help?
If you need help with your new air drill, call our
service department at: (570) 546-9663.
COPYRIGHT © NOVEMBER, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR6761 PRINTED IN CHINA
|
Grizzly Outboard Motor H5382 User Manual
Hasbro Games Ice Hammer User Manual
Heath Zenith Door 598 1172 02 User Manual
Honeywell DVR HD 16DVR C User Manual
Hotpoint Oven OSX 1036N D CX User Manual
HP Hewlett Packard Air Compressor 716 User Manual
HP Hewlett Packard Landscape Lighting model 3585d User Manual
HP Hewlett Packard Network Card 1100dtn User Manual
Humminbird GPS Receiver 858c User Manual
Husqvarna Blower 330BT User Manual