RECHARGEABLE 24 LED WORK LIGHT
MODEL 95181
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements; actual product may differ slightly from product described herein.
3491 Mission Oaks Blvd. Camarillo, CA 93011
Copyright© 2006 by Harbor FreightTools®. All rights reserved. No portion of this manual
or any artwork contained within may be reproduced in any shape or form without the
express written consent of Harbor FreightTools.
SKU 95181 ForTechnical questions, or replacement parts, please call 1-800-444-3353.
WARNINGS SPECIFICTOTHIS RECHARGEABLEWORK LIGHT
1. Use only in dry locations. Keep Adapter plug and socket dry at all times.
2. Only use the two Adapters provided with this Rechargeable Work Light.
Use of any other Adapter may damage this tool.
3. DO NOT look into or shine LED light into eyes of people or animals.
4. DO NOT submerge in water or any other liquid.
5. Keep away from children. Children are not aware of the damage improper
use of this Rechargeable Work Light can cause if shined in either their
own eyes or the eyes of another.
6. Always properly dispose of all used batteries.
7. Do not operate Work Light if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is doubt, do not operate
Work Light.
8. Do not operate the Work Light in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Electrical products create
sparks which may ignite the dust or fumes.
9. Always disconnect the Adaptor before making any adjustments or storing
the Work Light.
10.Turn off Work Light before leaving the work area. Warning: Never charge
this worklight by any other 12V car plug not supplied with this product.
CAUTION: The warnings, precautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and
general caution are factors that cannot be built into this product but must be
supplied by the operator.
UNPACKING
When unpacking, lay out parts and take inventory against the parts list on page 5
to insure that all parts are included. If parts are missing or damaged, please call
1-800-444-3353 for assistance.
OPERATION
NOTE: Before using Work Light for the first time, fully charge the Battery.
1. Use the Push Button, located below the lens for ON-OFF mode.
2. To suspend the light, pull out the Hanging Hook, located on the top of the
Rechargeable Work Light. The Hanging Hook can rotate 360° in rotation
for multiple positioning. If you are not using the Hanging Hook, simply
push it into its down position. (Figure 1, next page)
SKU 95181 For technical questions, please call 1-800-444-3353. Page 2
SKU 95181 For tech800-444-3353. Page 3
CHARGING
1. Use the supplied AC/DC Adapter, see (Figure 2), or the DC Adapter
with the Car Plug, see (Figure 3), for connecting the Rechargeable
Work Light to the correct power source.
2. Plug the end of the correct Adapter into the Recharge Port (5).
3. The Charging Indicator (6) will turn from RED to GREEN as the Battery
becomes fully charged.
4. The Charging time is 7 - 8 hours.
SKU 95181 For technical questions, please call 1-800-444-3353. Page 4
WARNING: Do not leave the Battery in a discharged state. Charge the
Battery once a month if the light is not in use.This will keep the
Battery from wearing down and add to its life.
NOTE: The LED Lights in this Rechargeable Work Light are exceptionally
long lasting, and are NOT replaceable.
PARTS LIST
1. ON-OFF Button
2. Retractable Hanging Hook (Swivels 360°)
3. LEDs
4. Low Battery Indicator
5. Recharge Port
6. Charging Indicator
7. Screw for opening the Battery Compartment
8. Battery Compartment
9. Battery Compartment Cover
10. Battery
NOTE: Some parts are listed for illustration purposes only, and are not
available individually as replacement parts.
SKU 95181 For Technical questions, please call 1-800-444-3353. Page 5
PARTS DIAGRAM
SKU 95181 For technical questions, please call 1-800-444-3353. Page 6
ATTACH RECEIPT OR COPY OF RECEIPT TO THIS PAGE
Write Serial Number (if available) or Model Number and
Purchase Date here_______________, __________________.
WARRANTY
LIMITED 90 DAY
®
WARRANTY
Harbor FreightTools Co.makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for
the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or
indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of
maintenance.We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.
Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection
verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase
price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
SKU 95181 For technical questions, please call 1-800-444-3353. Page 7
|